膏粉是裝修中不可或缺的材料，但很多人不知道：同樣是石膏粉，凝固時間可以從5分鐘到30分鐘不等。選錯凝固時間，要么來不及施工，要么等得耽誤工期。

Plaster powder is an indispensable material in decoration, but many people do not know that gypsum powder can have a solidification time ranging from 5 minutes to 30 minutes. Choosing the wrong solidification time either leaves no time for construction or delays the project timeline.

石膏粉從哪來？ 天然石膏（生石膏，CaSO?·2H?O）經過煅燒、磨細，就得到了建筑石膏（熟石膏，β-CaSO?·1/2H?O）。建筑石膏的主要成分是β型半水石膏。石膏粉按理化性質分為生石膏粉和熟石膏粉；按用途分為建筑石膏、高強石膏、模型石膏、醫用石膏等。

Where does gypsum powder come from? Natural gypsum (raw gypsum, CaSO? ·2H? O) is calcined and finely ground to obtain building gypsum (gypsum, β - CaSO?)? ·1/2H? O). The main component of building gypsum is β - type hemihydrate gypsum. Gypsum powder is divided into raw gypsum powder and mature gypsum powder according to its physical and chemical properties; Classified by purpose, it is divided into building gypsum, high-strength gypsum, model gypsum, medical gypsum, etc.

凝結時間的國家標準：根據GB/T 9776標準，建筑石膏的初凝時間要求≥3分鐘，終凝時間≤30分鐘。實際操作中，建筑石膏的初凝時間通常在5-15分鐘，終凝時間在15-30分鐘。這意味著：從加水?dāng)嚢璧介_始凝固，你只有幾分鐘的操作窗口。

National standard for setting time: According to GB/T 9776 standard, the initial setting time of building gypsum is required to be ≥ 3 minutes, and the final setting time is required to be ≤ 30 minutes. In practical operation, the initial setting time of building gypsum is usually 5-15 minutes, and the final setting time is 15-30 minutes. This means that from adding water and stirring to starting to solidify, you only have a few minutes of operation window.

影響凝結速度的3個因素：

Three factors that affect condensation speed:

煅燒溫度：煅燒溫度不同，得到的石膏類型不同。190°C左右得到模型石膏，凝結更快、強度更高。

Calcination temperature: Different calcination temperatures result in different types of gypsum. The model gypsum is obtained at around 190 ° C, which sets faster and has higher strength.

細度：石膏粉越細，與水接觸面積越大，凝結越快。特硬白石膏細度約1100目，建筑石膏約300目。

Fineness: The finer the gypsum powder, the larger the contact area with water, and the faster it sets. The fineness of ultra hard white gypsum is about 1100 mesh, and that of building gypsum is about 300 mesh.

外加劑：緩凝劑可以延長凝結時間，滿足特殊施工需求。

Admixtures: retarders can extend the setting time and meet special construction requirements.

不同用途對凝結時間的要求：

Requirements for setting time for different purposes:

嵌縫石膏：需要較長的操作時間，通常添加緩凝劑，凝結時間控制在20-30分鐘。

Jointing gypsum: requires a long operating time, usually with the addition of a retarder, and the setting time is controlled at 20-30 minutes.

石膏板生產：需要快速凝固定型，初凝時間控制在5-8分鐘。

Gypsum board production: requires rapid solidification and shaping, with an initial setting time controlled within 5-8 minutes.

裝飾線條制作：介于兩者之間，需要足夠的操作時間又不能太慢。

Decorative line production: Between the two, it requires sufficient operation time and cannot be too slow.

選購建議：買石膏粉時問清楚凝結時間。大面積抹灰選凝結時間稍長的（20-30分鐘），小面積修補選凝結快的（5-10分鐘）。千萬別買回來才發現——還沒抹完就已經硬了。

Suggestion for purchasing: When buying gypsum powder, ask for the setting time clearly. For large-scale plastering, choose those with slightly longer setting time (20-30 minutes), and for small-scale repairs, choose those with faster setting time (5-10 minutes). Don't just buy it and realize that it's already hard before you finish wiping it.

本文由濟南石膏粉友情奉獻.更多有關的知識請點擊:http://m.wavc.cn真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from Jinan gypsum powder For more information, please click: http://m.wavc.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.